COVID-19 Announcement: We are on the Essential Business list. We remain OPEN during this time.

What Causes Plumbing Leaks?

Plumbing leaks can lead to water damage, detect and fix them early on to save on plumbing costs

Uh-oh! Your dishwasher is leaking again. The first thing you see when you come down to your kitchen in the morning is a puddle of standing water in the middle of the floor. Why does this keep happening? What causes these plumbing leaks?

You have every right to be frustrated about those pesky plumbing leaks. Especially in some cases, when it can be hard to tell where they are even coming from. You can rely on our leak detection services and friendly experts to take care of those leaky pipes once and for all.

There are so many different factors that can contribute to a plumbing leak. So we thought it best to list some of the most common reasons below. Take a look at this guide and reach out to us ASAP when your plumbing goes on the fritz!


One of the most common causes of leaks in your plumbing system is having clogs somewhere in the pipes. Clogs block up the whole pipe, making it impossible for water to travel through it. Water often gets stuck in the plumbing, which builds up pressure on those poor little pipes that aren’t meant to hold that much water. Eventually, the pipes may burst or break, causing the water to leak out.

What causes these clogs? A lot of things. The most common items to clog your pipes include fruit peels, cotton products, grease, oil, towelettes, and fibrous foods.

Rust and Corrosion

Pipes are made of metal. Although they’re galvanized or sealed with waterproof coating, they still rust and corrode over time. The walls of the pipes can only withstand so much for so long before they need to be replaced. If your pipes are getting rather old, you may start to see leaks more frequently. Old pipes are more likely to crack, break, or burst with varying amounts of water pressure.

You can invest in leak detection services to pinpoint precisely where your corroded pipes are. With any luck, you’ll be able to get them repaired or replaced before they start to cause any significant leaks in the home.

Too High Water Pressure

If you’re constantly blasting your pipes with a ton of water, that pressure may end up being too much for your plumbing system to handle. Be careful with how much water pressure your pipes are giving you; if you feel that your water pressure is too strong, avoid using it too much until you can get in touch with an emergency plumber. A sign of high water pressure includes occasional leaks after the water has already been turned off.

Damaged or Broken Seals

Every plumbing pipe is fastened to your appliances (like sinks and toilets) with a watertight seal to prevent water from leaking out everywhere. It is the seal’s job to keep things watertight. But, it too can wear out and erode over time. Constant water pressure may cause the seal to break or crack, allowing water to seep through.

This is the most common cause of under-sink leaks. If your leaks always happen at the source of the appliance, there is a strong likelihood a damaged seal is the culprit.

Repair Leaks Before They Damage Your Home!

Consistent leaks are a bad sign. This means that you are dealing with some internal plumbing issues. Whether you have a broken seal, corroded pipes, or a nasty clog that you just can’t un-clog, our professionals are here to help you any time of day or night. We can detect plumbing leaks, repair plumbing, or install completely new pipes to keep your home systems running smoothly. Contact us online for more info or give us a call at 888-200-5780 to schedule a home visit with our experts.

Leave a Comment

Your email address will not be published. Required fields are marked *